Concrete Paving Vibrator
Product Features
Hydraulic head vibrators compatible with Gomaco, Guntert & Zimmerman, HEM, Miller Formless slipform concrete pavers.
With a head diameter of 2-5/8”, Minnich HV-2 Series hydraulic internal paving vibrators are ideal for most slip-form applications. Minnich paving vibrators are designed to withstand the rigors of the industry. For mainline paving, a block isolator offers better shear spring rate, less area for concrete build-up and a greater rubber-to-steel bond area. This translates to less end-of-day clean-up time, reduced transfer of vibration to the paver and less wear on the isolators. A two-isolator setup can fit into tighter areas for barrier wall molds. The hydraulic hose features an abrasion-resistant coating to help reduce vibrator failure. A specially designed Minnich three-gear motor provides hydrostatic balance for longer motor life and greater starting torque.
#Gomaco #Guntert&Zimmerman #HEM #Miller Formless
Minnich Vibrator Advantages Include:
Round Vibrator Heads
- Better consolidation
- Greater amplitude
- Greater velocity
- Greater influence
Block Isolator
- Standard on all paving models
- Better shear spring rate
- Less area for concrete build up
- Greater rubber to steel bond area
Armor Coated Hydraulic Hose
- Greater wear resistance
Minnich Designed and Built Hydraulic Motor
- Three gear motor provides hydrostatic balance for longer motor life
- Case hardened steel drive shaft and gear set
- Designed to provide greater starting torque
- Easy access to seal without complete tear down
Easy to Repair
- Factory repair schools and repair videos available
- Factory qualified dealer/repair network
- Any up-grades can be retrofitted to existing vibrators
Same Day Shipping
- Same day shipping on standard parts and most vibrator orders
24/7 Test Lab
- 24/7 product testing and on-going product improvement
Technical Data
Model | HV-2 Series |
---|---|
Head Diameter | 2-5/8″ (66.67mm) |
Centrifugal Force | 1902 LBS (8460.51N) |
Amplitude | 0.126″ (3.20mm) |
Diameter of Influence @ 10,500VPM | 26.50″-30.50″ (673.1mm-774.7mm) |
Diameter of Influence @ 8,000VPM | 20.25″-24.25″ (514.3mm-615.9mm) |
Maximum Flow | 4GPM (15.14 l/min) |
Normal Operating Pressure | 800-1300PSI (5.51-8.96MPa) |
Back Pressure Maximum | 150 PSI (1.03MPa) |
Rated For Pressure Up To 2500PSI (17.24MPa) |